en
Русский [ru]
HS-RSA
Description:
Seal type P RSA is designed with a shortened working dynamic edge. It is possible to install on a rod with high values of inconsistency and high pressures.
Addition:
Asymmetrical rod seal for standard applications. This cuff is an analog of GOST 14896-84 ""Rubber sealing collars for hydraulic devices"". Pre-tensioning seal provides reliable fixation in the mounting cavity, ensures reliable operation in the reverse motion.
Technical specifications:
Pressure: < 400 bar at temperatures up to 60В°C.
Speed: < 0,5 m/s.
Temperature: from -35В°C to +100В°C with a peak value of +110В°C.
Operating environment: mineral and hydraulic oil (see Table 1 on page 1.2.4).
Material:
Name: polyurethane (PU).
Addition: wear resistant polyurethane, resistant to hydrolysis.
Properties: has a high modulus of elasticity, low residual deformation and high abrasion resistance.
Hardness: Shore 93 В± 2.
Material code: CO.
Installation:
To prevent damage to the seal: before installation, it is necessary to observe the permissible surface roughness (grinding of the landing groove). The seal must always be lubricated before installation, which in turn facilitates installation and ensures perfect sealing performance.
- Description
Description:
Seal type P RSA is designed with a shortened working dynamic edge. It is possible to install on a rod with high values of inconsistency and high pressures.
Addition:
Asymmetrical rod seal for standard applications. This cuff is an analog of GOST 14896-84 ""Rubber sealing collars for hydraulic devices"". Pre-tensioning seal provides reliable fixation in the mounting cavity, ensures reliable operation in the reverse motion.
Technical specifications:
Pressure: < 400 bar at temperatures up to 60В°C.
Speed: < 0,5 m/s.
Temperature: from -35В°C to +100В°C with a peak value of +110В°C.
Operating environment: mineral and hydraulic oil (see Table 1 on page 1.2.4).
Material:
Name: polyurethane (PU).
Addition: wear resistant polyurethane, resistant to hydrolysis.
Properties: has a high modulus of elasticity, low residual deformation and high abrasion resistance.
Hardness: Shore 93 В± 2.
Material code: CO.
Installation:
To prevent damage to the seal: before installation, it is necessary to observe the permissible surface roughness (grinding of the landing groove). The seal must always be lubricated before installation, which in turn facilitates installation and ensures perfect sealing performance.
