0 0
Hello Guest Login    |    Registration
HG Hydraulic wiper rings

HG-WEL


Description:

The WEL scuff is typically used in one-way cylinders that are open on one side.

Due to its cleaning function, the inverted seal profile prevents the inner wall of the cylinder from deteriorating, which can be caused by atmospheric phenomena, condensation and other environmental factors.


Technical specifications:

Pressure: 0.

Speed: < 1 m/s.

Temperature: from -35В°C to +100В°C with a peak value of +110В°C.

Operating environment: water, dust or other atmospheric phenomena (see Table 1 on page 1.2.4).


Material:

Name: polyurethane type ""C0"" with high modulus of elasticity, low permanent deformation and high abrasion resistance.

Hardness: Shore 93 A.

Material code: C0.


Installation:

The installation is carried out by applying a half-open groove with a chamfer to prevent extrusion of the mud ring during the reverse cycle.

It is recommended that the permissible surface roughness of the landing groove.


Description


Description:

The WEL scuff is typically used in one-way cylinders that are open on one side.

Due to its cleaning function, the inverted seal profile prevents the inner wall of the cylinder from deteriorating, which can be caused by atmospheric phenomena, condensation and other environmental factors.


Technical specifications:

Pressure: 0.

Speed: < 1 m/s.

Temperature: from -35В°C to +100В°C with a peak value of +110В°C.

Operating environment: water, dust or other atmospheric phenomena (see Table 1 on page 1.2.4).


Material:

Name: polyurethane type ""C0"" with high modulus of elasticity, low permanent deformation and high abrasion resistance.

Hardness: Shore 93 A.

Material code: C0.


Installation:

The installation is carried out by applying a half-open groove with a chamfer to prevent extrusion of the mud ring during the reverse cycle.

It is recommended that the permissible surface roughness of the landing groove.