Toll-Free from all regions of Russia
Write a letter (info@avtokomtg.com)

Торцевое уплотнение насоса, Торцевые уплотнения в Волгограде, Торцевые уплотнения для насосов, Уплотнение вала, Ротационные соединения

  • Manufacturing and supply of bottling lines components

  • Mechanical seals

  • Rotary pressure joints

  • Rubber products

  • Plastic products

  • Steel products and hybrid bearings

  • Fitting keg repair kits

  • Seals and plates of heat exchangers

  • Modular belts, plate chains, conveyor components

Hydraulic seals

Hydraulic seals
Hydraulic seals, one of the important components, on which depends the performance and reliability of hydraulic and pneumatic components and mechanisms. However, the seals are also the weakest component of...
read more

VMQ – Methylvinyl silicone

VMQ  – Methylvinyl silicone
VMQ (methylvinyl silicone, silicone rubber) is a derivative of quartz. When it is created, organic groups such as methyl, phenyl and vinyl are attached to silicon atoms. The addition of...
read more

The effect of high pressure and vacuum on the mechanical seal

The effect of high pressure and vacuum on the mechanical seal
How high pressure affects the mechanical seal. The high pressure of the working fluid in the mechanical seal causes the following problems: 1. An additional axial hydraulic load is created...
read more

Viscosity of fluid and its effect on pumping equipment

Viscosity of fluid and its effect on pumping equipment
The fluid viscosity is defined as the leakage resistance, i.e. The more viscous the medium, the less leakage.However, a more viscous liquid affects the performance of the pump in several...
read more

Complexities that arise with original mechanical seals

Complexities that arise with original mechanical seals
What difficulties can occur with pre-installed mechanical seals? If you purchase a pump, mixer or other rotating equipment and do not ask the supplier to provide it with a certain...
read more

Rotary axes for monoblock filling machines

Rotary axes for monoblock filling machines
The AvtokomTehnolodgy group of companies supplies rotary axes for monoblock filling machines of Krones AG. This type of rotation axes is made of heat-resistant materials, due to which, corrosion resistance,...
read more

Selection of pump for the food industry

Selection of pump for the food industry
Many problems with pumping the liquid arise because some pump designs are not designed or suitable for use under the operating conditions for which they are selected. It is necessary,...
read more

Wear or reduction of the pump shaft

Wear or reduction of the pump shaft
Note that when removing the grease or lip seal (rubber seal located next to the bearing), you will notice that the shaft has a groove or is damaged under the...
read more

Reasons for overheating of mechanical seals

Reasons for overheating of mechanical seals
A large amount of heat can cause a lot of problems with the mechanical seal: - elastomer may be damaged; - some sealing surfaces may be damaged; - carbon graphite...
read more

History of rotary joints

History of rotary joints
At the end of the XIX, beginning of the XX century, the supply of water or steam in a rotating cylinder was carried out with the help of stuffing box...
read more

Manual for operation of mechanical seals UCA, UCB, UCC, UCD

Manual for operation of mechanical seals UCA, UCB, UCC, UCD
Carefully read the contents of this manual, it will help you avoid breakdowns and injuries! Security. Types of seals. Description. Options. Creating connections. Directions. Intended use. Storage. Before installation. Auxiliary...
read more

History of mechanical seals

History of mechanical seals
History of the development of leading companies in the field of sealing. In the sealing industry, mechanical seals have existed for more than 100 years. The first known company was...
read more

History of success

History of success
Kroma LTD, working in the sealing industry, has always believed that this industry is different from the others. It has a lot of features that define your company in every...
read more

Designs of modern mechanical seals

Designs of modern mechanical seals
Where have we been, and where should we be going? You've been using mechanical seals for many years now. Over the years you've witnessed many design changes, but have there...
read more

Lubrication of mechanical seal

Lubrication of mechanical seal
Lubricating the rubber parts of the seal. Lubricants are used on the elastomers to make installation easier, but you must be careful: - Any petroleum lubricant will damage an ethylene...
read more

Mechanical seals for pumps

Mechanical seals for pumps
Definition, assignment. Location, the main components. Materials of manufacture. Lubrication. Wear. Standards and GOST. Advantages and reliability factors. Classification of mechanical seals. Operation, maintenance and repair. Definition, assignment. Today, mechanical...
read more

Production of rotary joints according to customer drawings

Production of rotary joints according to customer drawings
The AvtokomTehnolodgy group of companies supplies double-flow rotary joints for workers such as oil, air, vacuum, water, steam, ink, which are widely used in a wide variety of industries. In...
read more

Cartridge mechanical seals for sugar solution

Cartridge mechanical seals for sugar solution
Over the past year, the AvtokomTehnolodgy group of companies has significantly expanded its customer base, thanks to the experience and well-coordinated work of highly qualified specialists. In our lineup there...
read more

Spring mechanical seals

Spring mechanical seals
One of the types of mechanical seals is spring seals, such seals include secondary seals called a dynamic gasket that are pushed axially by a spring along the shaft or...
read more

Mechanical seals for slurry pumps

Mechanical seals for slurry pumps
The AvtokomTehnolodgy group of companies delivers a full range of sealing products for all types of slurries and suspensions.They are designed to work in all modes. If your equipment works...
read more

The most common types of mechanical seals

The most common types of mechanical seals
To date, the market is so oversaturated with offers of mechanical seals, that many consumers are beginning to get confused about the markings and the types of their execution. Therefore,...
read more

Plastic belts for conveyors

Plastic belts for conveyors
Now any food production doesn't do without conveyors. They are present in the design of the filling line, for moving the bottle from blowing to packaging, in equipment for the...
read more

Calculation the technical parameters of mechanical seals

Calculation the technical parameters of mechanical seals
Coefficient of load: For assessment of mechanical seal except coefficient of hydraulic unloading use also dimensionless coefficient of loading x. For large differences sealing pressure ratio hydraulic unloading and load...
read more

Recommendations for installation of mechanical seals

Recommendations for installation of mechanical seals
For details, we strongly recommend you look in the instruction for installation and operation of mechanical seals various types. Here are just some general guidelines for the installation of seals....
read more

Gas mechanical seals and gas supply systems

Gas mechanical seals and gas supply systems
Seals lubricated by gas are known for their efficiency, reliability and environmental friendliness. They are used in almost any industry and for any purpose. Until recently gas seals were associated...
read more

Application of mechanical seals in food and pharmaceutical industry

Application of mechanical seals in food and pharmaceutical industry
The food and pharmaceutical industries focusing on sterility in the preparation, production and packaging of food. In these industrial sectors, in addition to appropriate technical specifications, seals used in the...
read more

Application of mechanical seals in sugar industry

Application of mechanical seals in sugar industry
Sugar industry - this is one of the many branches of the food industry, which is engaged in the production of sugar from sugar beets. Trouble-free compaction equipment - an...
read more

Application of mechanical seals in pulp and paper industry

Application of mechanical seals in pulp and paper industry
The pulp and paper industry is a branch of forestry, which includes companies engaged in the production of cellulose, cardboard, paper, etc. The plants of pulp and paper industry can...
read more

Application of mechanical seals in treatment facilities

Application of mechanical seals in treatment facilities
Sewage treatment plant is a set of measures and structures designed to purify the waste water prior to its recycling. In these plants, municipal and industrial sewage is pumped to...
read more

Installation and operation of rotary joints

Installation and operation of rotary joints
Rotary pressure joints series UOPM (unidirectional) / UOPD (bidirectional) Rotary pressure joints UOPM Rotary pressure joints UOPD General recommendations Rotary pressure joint - precision-made piece of equipment, which must be...
read more

UP