Toll-Free from all regions of Russia
Write a letter (info@avtokomtg.com)

Торцевое уплотнение насоса, Торцевые уплотнения в Волгограде, Торцевые уплотнения для насосов, Уплотнение вала, Ротационные соединения

  • Manufacturing and supply of bottling lines components

  • Mechanical seals

  • Rotary pressure joints

  • Rubber products

  • Plastic products

  • Steel products and hybrid bearings

  • Fitting keg repair kits

  • Seals and plates of heat exchangers

  • Modular belts, plate chains, conveyor components

Catalog of hydraulic seals

28 June 2018
Catalog of hydraulic seals
The AvtokomTehnolodgy group of companies introduces to you a new catalog of hydraulic seals, where we collected the most popular seals for you, which are the most popular among customers....
read more

Smart cartridge mechanical seals

15 June 2018
Smart cartridge mechanical seals
Kroma LTD has developed and started the production of modules that allow monitoring the status of cartridge seals. This year at the international exhibition of chemical industry ACHEMA, Kroma LTD...
read more

Pumps and pumping equipment CNP

25 August 2017
Pumps and pumping equipment CNP
The AvtokomTehnolodgy group of companies has another direction - the supply of centrifugal pumps in stainless steel of a well-known manufacturer. We became the official representative of CNP in Russia....
read more

Rotary joints for pulp and paper mills

3 July 2017
Rotary joints for pulp and paper mills
The AvtokomTehnolodgy group of companies supplies water-supplying double-flow rotary joints, which are widely used at pulp and paper mills. We are ready to offer you analogues of rotary joints of such manufacturers...
read more

Catalog of conveyor components and chains

26 May 2017
Catalog of conveyor components and chains
The AvtokomTehnolodgy group of companies presents to your attention a catalog of conveyor components conveyor components and chains, in which we collected for you the most popular items of goods...
read more

Conveyors and components

30 March 2017
Conveyors and components
The AvtokomTehnolodgy group of companies represents in the Russian market of food industry conveyors and conveyor components of imported production: using high-quality environmentally friendly raw materials, with a wide range...
read more

Mechanical seals for explosive environments

20 October 2016
Mechanical seals for explosive environments
The standard of explosion protection of ATEX is requirements, for the electric and not electric equipment which observance, is obligatory when using the equipment, in potentially explosive environments. List of...
read more

Success of AvtokomTehnolodgy at the international forum "Beer-2016"

7 June 2016
Success of AvtokomTehnolodgy at the international forum "Beer-2016"
Group of companies «AvtokomTehnolodgy» has taken part in the XXV Anniversary international forum «Beer-2016» At an exhibition AvtokomTehnolodgy has presented a set of samples of the products. Visitors of our...
read more

The AvtokomTehnolodgy group of companies at the XXV Anniversary international forum "Beer-2016"

28 April 2016
The AvtokomTehnolodgy group of companies at the XXV Anniversary international forum "Beer-2016"
The AvtokomTehnolodgy group of companies will participate in the XXV Anniversary international forum "Beer" which will take place from May 17 to May 20, 2016 in the exhibition center of...
read more

Delivery and production of rotary pressure joints

8 April 2016
Delivery and production of rotary pressure joints
The AvtokomTehnolodgy group of companies offers the alternative of any producers of rotary pressure joints such as DEUBLIN, MAIER, ROTOFLUX, DUFF NORTON, KADANT JOHNSON, JOHNSON FLUITEN, which isn't yielding on...
read more

Delivery, production and upgrade of mechanical seals

22 December 2015
Delivery, production and upgrade of mechanical seals
The AvtokomTehnolodgy group of companies offers the alternative of any producers of mechanical seals which isn't yielding on quality of the original on more beneficial price, and also possibility of...
read more

Components for conveyor equipment

2 December 2015
Components for conveyor equipment
The AvtokomTehnolodgy group of companies extended the range of products supplied. Now we have opportunity to deliver various chains, tapes and grids for an industrial equipment from the European producer...
read more

Another step to success

20 July 2015
Another step to success
For the first time, AvtokomTehnolodgy Group of Companies attended the XXIVth International Forum "Beer-2015". There, our company succeded in revealing its full potential in the area of complex filling line...
read more

Filling line delivery and installation

20 July 2015
Filling line delivery and installation
Expanding our business horizons. Filling line delivery and installation. AvtokomTehnolodgy is looking at new horizons. We are glad to announce that now we can supply and install filling equipment of...
read more

Supplying plates and seals for heat exchangers

20 July 2015
Supplying plates and seals for heat exchangers
AvtokomTehnolodgy supplies plates and seals for heat exchangers of such companies as APV, GEA, Alfa Laval, SIGMA, Fischer and others. We offer European quality within a short time and at...
read more

Mechanical seals in hostile environment

20 July 2015
Mechanical seals in hostile environment
Mechanical seals with Kalrez® material AvtokomTehnolodgy supplies food industry companies with mechanical seals for pumps produced by Hilge, KSB, Grundfos, Packo, Ebara, Wilo, Tuchenhagen, Alfa Laval, APV, Fristam and others.Our...
read more

Interview to the "RUSSIAN FOOD & DRINKS MARKET" magazine

20 July 2015
Interview to the "RUSSIAN FOOD & DRINKS MARKET" magazine
AVTOKOMTEHNOLODGY: We want to contribute to the development of the industry AvtokomTehnolodgy has been operating in the Russian market since 2008 and proved to be a reliable supplier and manufacturer...
read more

Article in the "RUSSIAN FOOD & DRINKS MARKET" magazine

20 July 2015
Article in the "RUSSIAN FOOD & DRINKS MARKET" magazine
Delivery and manufacture of filling line components AvtokomTehnolodgy has been operating in the Russian market since 2008 and proved to be a reliable supplier and manufacturer of filling line components...
read more

Manufacturing diaphragms for diaphragm-type pumps

17 July 2015
Manufacturing diaphragms for diaphragm-type pumps
AvtokomTehnolodgy has started producing food grade rubber diaphragms for NURZAN, Dellmeco, Wilden and other diaphragm pumps used in the food industry. Thanks to the well-proven technology, it is possible to...
read more

Extending the range of spares manufactured for the Krones and KHS lines

17 July 2015
Extending the range of spares manufactured for the Krones and KHS lines
Central pivots Production of central pivots for one-piece filling machines manufactured by Krones has been launched. Due to the thoroughly selected materials, this type of pivots has high resistance to...
read more

Hybrid radial ball bearings

17 July 2015
Hybrid radial ball bearings
Modern food industry equipment manufactured by such companies as Krones, KHS, Sidel, Tetra Pak, and Arol, which is used for filling alcohol and soft drinks, milk products, household chemicals and...
read more

ISO 9001-2011 Quality Management Certificate

17 July 2015
ISO 9001-2011 Quality Management Certificate
AvtokomTehnolodgy is entering the food industry segment of the global market. For this reason, the management of our company decided to undergo certification as per ISO 9001-2011 quality management system....
read more

Opening an office in Saint-Petersburg

17 July 2015
Opening an office in Saint-Petersburg
In view of the buoyant development of the food industry market and AvtokomTehnolodgy's deep penetration into this segment, as well as the increased customer base and the need to find...
read more

EPDM - ethylene-propylene-diene monomer

17 July 2015
EPDM - ethylene-propylene-diene monomer
EPDM is a semi-finished product made of peroxy-crosslinked ethylene-propylene-diene rubber. EPDM is filled with carbon black and, therefore, cannot be used in electrical insulation. EPDM is usually black in color....
read more

"Radost Detstva" (Joyous Childhood) Charity Fund

17 July 2015
"Radost Detstva" (Joyous Childhood) Charity Fund
The Radost Detstva Charity Fund has been organizing events aimed at social adaptation of disabled children for a few years now, including New Year performances for children diagnosed with ICP...
read more

Renovation of the intake bars (lamellae) for labeling machines

15 June 2015
Renovation of the intake bars (lamellae) for labeling machines
"AvtokomTehnolodgy" has mastered new technology of renovation of intake bars for clampshell drums of Krones AG labeling machines. The renovation process includes removal of old worn out rubber coating and...
read more

Manufacture and supply of repair kits for keg fittings

12 June 2015
Manufacture and supply of repair kits for keg fittings
Fitting basic function lies in leak-proof sealing of beer KEGS using seals. Kegging is performed by means of collecting head. KEGs are filled and washed through fittings. The whole cycle...
read more

Supply of rotation axes for single-block automatic bottling machines

10 June 2015
Supply of rotation axes for single-block automatic bottling machines
Supply of rotation axes for single-block automatic bottling machines manufactured by Krones company. “AvtokomTehnolodgy” LLC is the supplier of rotation axes for single-block automatic bottling machines manufactured by Krones company....
read more

UP