en
Русский [ru]
HG-R09
Description:
The function of the wiper ring R09 is to clean the rod during return to its original position and to protect it from external contamination.
This type of structure includes a metal frame connected to a polyurethane element.
The structure of this type includes a straight metal frame connected to an element of NBR material.
Technical specifications:
Speed: < 1 m/s.
Temperature: -30В°C to +100В°C.
Operating environment: atmospheric factors, water, sand, etc. (see Table 1 on page 1.2.4).
Material:
The material used in the manufacture of the wiper ring is nitrile rubber NBR 90 Shore A, steel part - AISI 1010.
Material code: NG.
Installation:
Installation is carried out in an open landing groove.
For a more convenient installation of the seal, the allowable surface roughness.
Caution: The size of the landing groove of the wiper ring should be within tolerance, as shown in column D. If the above values are not observed, the seal may be squeezed out during operation.
- Description
Description:
The function of the wiper ring R09 is to clean the rod during return to its original position and to protect it from external contamination.
This type of structure includes a metal frame connected to a polyurethane element.
The structure of this type includes a straight metal frame connected to an element of NBR material.
Technical specifications:
Speed: < 1 m/s.
Temperature: -30В°C to +100В°C.
Operating environment: atmospheric factors, water, sand, etc. (see Table 1 on page 1.2.4).
Material:
The material used in the manufacture of the wiper ring is nitrile rubber NBR 90 Shore A, steel part - AISI 1010.
Material code: NG.
Installation:
Installation is carried out in an open landing groove.
For a more convenient installation of the seal, the allowable surface roughness.
Caution: The size of the landing groove of the wiper ring should be within tolerance, as shown in column D. If the above values are not observed, the seal may be squeezed out during operation.
